Chauvet Tiger DMX 60 Betreibershandbuch PDF herunterladen (Seite 99)

3. Controlling dimmers and fixtures - Page 131

Pearl 2008 Manual - 16th July 2007

press B [Recall Focus])

3.1.10 Fan mode

Fan mode automatically spreads out the values on a selected range of

fixtures. If used on pan and tilt, the result is spreading out “rays” of

light beams. The first and last fixtures of the range are affected most,

and the central fixtures are affected least. The amount of fan can be set

using the wheels.

As with shapes, the order in which you select the fixtures sets how the

fan effect works. The fixtures you select first and last will be the ones

which change most. If you use a group to select the fixtures, the order

is that in which the fixtures in the group were selected when it was

created.

The fan effect, while normally used on pan or tilt attributes, can be

applied to any attribute.

1> Select the fixtures you want to fan

2> Select the attribute to fan (pan/tilt, colour etc)

3> Press Fan

4> Set the amount of fan using the wheels

5> The display shows which attribute is being controlled by each

wheel

6> Turn off Fan by pressing the Fan button again when you have

finished

Fan mode needs to be used on at least 4 fixtures to give good effects.

If you have an odd number of fixtures, the central fixture will not move

in fan mode.

Press the Fan button again to leave Fan mode. Any effects you have set

will remain in the programmer.

• It’s fairly easy to accidentally leave Fan mode turned on and be

very confused about why the wheels aren’t working properly, so

turn it off as soon as you have completed the effect.

3.2 Advanced options

3.2.1 The ML menu and Tracking

The “ML menu” (Moving Light menu) button allows access to some

handy features for moving lights.

If you press the ML Menu button again you will get a second set of

options

Option A “Locate Fixture” positions selected fixtures at central position,

with light coming out of them. The settings are not placed in the

programmer, so you need to change the values if you want to save

them. The “locate fixture” settings for each type of fixture are defined

in the personality file. This function is the same as pressing the red

Locate button.

Option B “Locate Fixture no pan/tilt” turns on the selected fixtures but

does not move them to a central position. This is useful if you don’t

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 205 206

Kommentare zu diesen Handbüchern

Keine Kommentare

Chauvet Tiger DMX 60 Betreibershandbuch Seite 99

Kommentare zu diesen Handbüchern