Chauvet Tiger DMX 60 Betreibershandbuch PDF herunterladen (Seite 130)

Page 162 - 7. Chases

Pearl 2008 Manual - 16th July 2007

7.2.5 Viewing chase steps

You can preview the output of a chase

step on the display. The chase does

not have to be connected or running.

1> Press View.

2> Press the Swop button of the

chase to view.

3> Choose the attribute to view by

pressing one of the Attribute

buttons.

4> Use softkeys F and G to step

through the chase, or type a new

step number and press Enter.

• Values with a “P” indicate that a

palette has been stored in the

step; the number is the palette

number.

You can view the steps of a connected chase by pressing View then

Connect. See page

167.

7.3 Edit

7.3.1 Adding more steps to the end of a chase

You can add steps to the end of a chase by pressing Chase, then the

Swop button of the chase, and saving more steps in the same way as

you did when creating the chase. New steps you save will be added

onto the end of the chase.

7.3.2 Inserting steps into a chase

You can insert a new step into a chase using the blue Insert button.

The chase must be connected.

1> Turn on the chase, or press Connect and the chase’s Swop button.

2> Set up the lights how you want them for the new step.

3> Press the blue Insert button.

4> Type in the step number for the new step and press Enter (the

number is shown on the top line of the display). For example to

put a step in between 2 and 3, enter a step number of 2.5.

5> Set the timing for the new step (see section

7.6) and press Enter,

or just press Enter to insert the step with the default timing.

6> Repeat from 4 to insert another step, or press F [Press to quit

insert] to end.

You can renumber all steps in the chase to whole numbers by pressing

A [Renumber] while in the chase step insert menu.

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 205 206

Kommentare zu diesen Handbüchern

Keine Kommentare

Chauvet Tiger DMX 60 Betreibershandbuch Seite 130

Kommentare zu diesen Handbüchern