Chauvet Tiger DMX 60 Betreibershandbuch Seite 91

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 206
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 90
2. Patching - Page 123
Pearl 2008 Manual - 16th July 2007
2> Press the Swop buttons of the fixtures you want to change
3> Repeat from 2 to change other fixtures.
D: Set DMX lines - The Pearl has 4 DMX output lines, this option lets
you set which connectors they come out of. You can output the same
DMX line from more than one connector if you want to.
The console shows the current settings of the DMX outputs on the VDU
screen. You need the VDU screen connected to set this option, as the
settings are not shown on the on-board display. Use the cursor arrows
to select the output you want to change. Press Softkeys A-D to select
the DMX line you want to come out of this output.
You can also use this option to set the highest DMX channel to
transmit. This will speed up the DMX refresh rate if you are not using all
512 channels. (This option can also be set from the User settings
menu).
E: Find fixture - This option lets you find “lost” fixtures (if you have
set the DMX address and forgotten what it was, or a fixture has
changed its address on its own). You need the VDU screen connected to
use this option as the settings are not shown on the on-board display.
1> Using the cursor arrows, select the type of fixture & press enter
2> Spin wheel A until the fixture responds with its “Locate Fixture”
state (open white beam, central position). Use the cursor up and
down arrows to change one channel at a time.
3> You can change the DMX output line using the A B C D softkeys or
directly enter a channel by pressing softkey G
4> Read the DMX address from the VDU screen.
5> Press Exit when you have finished.
F: Set Default DMX lines - This option sets the DMX line mappings
back to the factory defaults, as shown in Chapter 1. The LCD display
also shows how the DMX lines will be set. Press Softkey A to confirm
the setting.
Seitenansicht 90
1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 205 206

Kommentare zu diesen Handbüchern

Keine Kommentare