Chauvet Tiger DMX 60 Betreibershandbuch PDF herunterladen (Seite 119)

6. Memories - Page 151

Pearl 2008 Manual - 16th July 2007

memory starts to fade in, and stay there until another value is set.

(You can set the value this happens at using the User settings

menu).

The fixture personality file tells the Pearl which channels of a fixture are

HTP and which are LTP. Normally, only dimmer attributes are HTP, and

everything else is LTP. If a fixture does not have an intensity control

channel, the Gobo channel is defined as HTP to make sure the fixture

blacks out when a memory is turned off.

6.2.2 Playing back a memory

To play back a memory, raise the fader. (Make sure there are no values

in the programmer by pressing the Clear button, because anything in

the programmer will override the playback).

• You can turn on more than one memory at once.

• All the HTP (intensity) channels in the memory will fade up with

the fader. The LTP (movement) channels will be set as soon as the

fader leaves the zero position. You can set the point at which this

occurs on the User settings menu. (If you have changed the

memory to be Mode 1 or 2, the LTP channels fade as well, except

for channels set to be Instant).

• You can Flash the memory by pressing the grey flash button. You

can Swop (solo) the memory by pressing the blue Swop button

(all other active memories will turn off while the button is

pressed). The Flash and Swop buttons only operate in Normal Run

mode.

• You can preload the fixture settings from the memory so that

there will be no unwanted movements when you raise the fader.

You must have the key set to Run mode to do this. Lower the

Add/Flash Master to zero and press the memory’s Flash button.

6.2.3 Changing playback pages

You can change pages to select another 15 memories simply by rolling

the Roller to a new segment. You can select 3 different pages of roller

using the Roller Page buttons giving 30 possible pages in all.

• Playbacks which are turned on when you change page remain

active. The VDU screen shows the name of the active memory in

the bottom row, and the name of the memories from the new

page in the top row.

• If you want to turn on a playback which is already on from a

previous page, lower the fader to zero then raise it again. The

memory from the previous page will turn off and the memory from

the new page will turn on.

• You can label the current playback page by pressing D [Set

Legend], then A [Current page], then entering a label using the

Qwerty keyboard.

6.3 Edit

6.3.1 Editing a memory

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 205 206

Kommentare zu diesen Handbüchern

Keine Kommentare

Chauvet Tiger DMX 60 Betreibershandbuch Seite 119

Kommentare zu diesen Handbüchern