Chauvet Tiger DMX 60 Betreibershandbuch PDF herunterladen (Seite 79)

1. Setting up the console - Page 111

Pearl 2008 Manual - 16th July 2007

The brightness control sets the intensity of the display’s backlight.

1.1.6 The desk lamp

The desk lamp plugs into the socket in the top left hand corner of the

Pearl and can be switched to Off, Dim or Full using the switch next to it.

The desk lamp uses a 12V, 5W halogen lamp.

1.2 Operating

1.2.1 Operating modes

The Pearl has a key-operated switch on the right hand side of the panel

which allows you to select the operating mode of the console.

When running a show, you normally select Run mode. You can run

playbacks and (in Takeover run mode) manually control fixtures (see

page

183). You cannot change any programming. This is the best mode

if others are operating the console and you want to make sure they

can’t mess up your programming. Just take the key with you!!

When programming, you need to be in Program mode, which you

access by turning the key to Program. This manual assumes you are in

program mode.

System mode allows you to clear parts or all of the console using

softkey F [Wipe], to access AVO mode, various diagnostics and to load

a new operating system. There are more details about AVO mode in

Section

13 on page 204.

1.2.2 Saving to and loading from disk

The Pearl 2008/Tiger has a USB port for connection of a USB pen drive

to load and save shows. It is also fitted with an internal USB disk for

saving shows and storing personality files.

All versions of the Pearl have a 1.44MB floppy disk drive which is used

to load and save shows, personality files and system software. The

standard PC disk format is used, so you can transfer data to and from

your PC. You can use the smaller 720KB disks, but large shows may not

fit.

You should get into the habit of backing up your show to disk regularly

to guard against that moment when something goes wrong or you

make an unintentional change.

1> Press the Disk button in the bottom right hand corner of the Pearl

2> Insert a blank formatted 1.44M disk into the disk drive.

3> Press B [Save show to disk]. Enter a name on the QWERTY

keyboard (or press Enter on the console to use the default name).

The Pearl will save the show.

4> To reload the show, use softkey A [Load show from disk].

Other disk drive functions are available when you have pressed the

Disk button. The disk drive functions are described in section

13 on

page

197.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 205 206

Kommentare zu diesen Handbüchern

Keine Kommentare

Chauvet Tiger DMX 60 Betreibershandbuch Seite 79

Kommentare zu diesen Handbüchern