Chauvet 6 spot Bedienungsanleitung PDF herunterladen (Seite 18)

Page 18 of 20 Intimidator™ Spot 100 IRC User Manual

5. TECHNICAL INFORMATION

Product

Maintenance

Dust build-up reduces light output performance and can cause overheating. This can

lead to reduction of the light source’s life and mechanical wear. To maintain optimum

performance and minimize wear, clean the product at least twice a month. However,

usage and environmental conditions contribute to increased cleaning frequency.

To clean the product, follow the instructions below:

• Unplug the product from power.

• Wait until the product is at room temperature.

• Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on

the external surface/vents.

• Clean all external optics and glass/transparent surfaces with a mild soap solution,

ammonia-free glass cleaner, or isopropyl alcohol.

• Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.

• Softly wipe any dirt or grime to the outside edges of the external optics or

glass/transparent surface.

• Gently polish the external optics and glass/transparent surfaces until they are free of

haze and lint.

Always dry the external optics and glass/transparent surfaces carefully after

cleaning them.

Do not spin the cooling fan/fans using compressed air

because you could damage

it/them.

1 2 ... 13 14 15 16 17 18 19 20

Keine Kommentare

Chauvet 6 spot Bedienungsanleitung Seite 18