Chauvet 6 spot Bedienungsanleitung PDF herunterladen (Seite 13)

Intimidator™ Spot 100 IRC User Manual Page 13 of 20

Configuration

(Standalone)

Set the product in one of the standalone modes to control without a DMX controller.

1. Connect the product to a suitable power outlet.

Never connect a product that is operating in any standalone mode (Static,

Automatic, or Sound-Active) to a DMX string connected to a DMX controller.

Products in standalone mode may transmit DMX signals that could interfere with

the DMX signals from the controller.

Sound-Active

Mode

To enable the Sound-Active mode, do the following:

1. Press <MODE/ESC> repeatedly until one of the following Operating modes shows

on the display: SLAV, NASL, NAFA, NStS, NSti.

2. Use <UP> or <DOWN> to select NStS.

3. Press <ENTER> and Srun shows on the display.

The product will only respond to low frequencies of music (bass and drums).

Automatic Mode

To enable the Automatic mode, follow the instructions below:

1. Press <MODE/ESC> repeatedly until one of the following shows on the display:

SLAV, NASL, NAFA, NStS, NSti.

2. Use <UP> or <DOWN> to select NASL (slow program) or NAFA (fast program).

3. Press <ENTER> and SLoU (slow program) or FASt (fast program) shows on the

display.

NSti Operating

Mode

To enable the NSti Operating mode, do the following:

1. Press <MODE/ESC> repeatedly until one of the following shows on the display:

SLAV, NASL, NAFA, NStS, NSti.

2. Use <UP> or <DOWN> to select NSti.

3. Press <ENTER> and NodE, NoSP, NoSE, NoPr, LEd, diMM, SHut, Gobo, GoSP,

CoLr, or SoSP show on the display.

4. Use <UP> or <DOWN> to select the desired option as follows:

To select from the movement macro options:

1. Select NodE and press <ENTER>.

2. Use <UP> or <DOWN> to select Soun (Sound-Active) or Auto (Automatic).

3. Press <ENTER>.

To select the movement macro speed:

1. Select NoSP and press <ENTER>.

2. Use <UP> or <DOWN> to select 000—255.

3. Press <ENTER>.

To select the sound sensitivity:

1. Select NoSE and press <ENTER>.

2. Use <UP> or <DOWN> to select 00—09.

3. Press <ENTER>.

To select the movement macro:

1. Select NoPr and press <ENTER>.

2. Use <UP> or <DOWN> to select 01—09.

Note: No macro is selected if you choose 00.

3. Press <ENTER>.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Chauvet 6 spot Bedienungsanleitung Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Flutlichter Chauvet 6 spot