Chauvet 6 spot Bedienungsanleitung PDF herunterladen (Seite 10)

Page 10 of 20 Intimidator™ Spot 100 IRC User Manual

Configuration

(DMX)

Set the product in DMX mode to control with a DMX controller.

1. Connect the product to a suitable power outlet.

2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input

socket on the product.

Starting Address

When selecting a starting DMX address, always consider the number of DMX channels

the selected DMX mode uses. If you choose a starting address that is too high, you could

restrict the access to some of the product’s channels.

The Intimidator™ Spot 100 IRC uses up to 11 DMX channels in its 11-channel personality

name/single DMX mode, which defines the highest configurable address to 502.

If unfamiliar with DMX, download the DMX Primer from www.chauvetlighting.com

To select the starting address, do the following:

1. Press <MODE/ESC> repeatedly until d001—d512 shows on the display.

2. Use <UP> or <DOWN> to select the starting address.

3. Press <ENTER>.

DMX

Personalities

The Intimidator™ Spot 100 IRC has two DMX Channel modes, a 6-channel personality

and an 11-channel personality.

To choose a DMX personality, follow the steps below:

1. Press <MODE/ESC> repeatedly until either 11CH (11-channel mode)

or 6-CH (6-channel mode) shows on the display.

2. Use <UP> or <DOWN> to select the desired DMX personality.

3. Press <ENTER>.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Keine Kommentare

Chauvet 6 spot Bedienungsanleitung Seite 10