Operation
Nexus™ 4x4 User Manual -15-
This setting determines how long the backlight on the display stays on.
1. Go to the Back Lite main level.
2. Select the desired amount of time the backlight display will stay on after pressing
the last menu button (
,
,
, or
).
This menu option provides software information that is needed for certain programming
functions and software uploads.
1. Go to the Info main level.
2. Select the desired program level based on the information required.
a. Fixture Hours – Displays the amount of time the product has been in use.
b. Version – Displays the software version installed.
c. IP Address – Displays the product’s IP address.
d. Device ID – Displays the product’s ID number (used for Kling-Net only).
In this mode, each product will respond to a unique starting address from the DMX
controller. All products with the same starting address will respond in unison.
1. Select a DMX personality (see DMX Personality).
2. Set the starting address:
a. Go to DMX Address main level.
b. Select the starting address (001~512).
This setting allows you to choose a particular DMX personality.
1. Go to the DMX Channel main level.
2. Select the desired
(
,
,
,
, or
).
For the highest starting address you can select for each personality, see the DMX
Values section.
Make sure that the starting addresses on the various products do not overlap due to the
new personality setting.
The highest recommended starting address for each DMX mode are as follows:
DMX Mode DMX Address DMX Mode DMX Address
The Master/Slave mode allows a group of Nexus™ 4x4s (slave units) to simultaneously
duplicate the output of another Nexus™ 4x4 (master unit) without a DMX controller.
1. Setting each of the slave products:
a. Go to Master/Slave main level.
b. Select Slave.
2. Setting the master product:
a. Go to Master/Slave main level.
b. Select Master.
c. Select an auto program (see Auto Programs
), or a static mix of colors (see
Static Color).
• The master product runs a program whether in Auto or Static color mode.
• Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master product.
• The master product should be the first product in the daisy chain.
Kommentare zu diesen Handbüchern