Operation
-14- Nexus™ 4x4 User Manual
4. Operation
Description
Button Function
Scrolls through the main menu and exits from the current menu
or function
Enables the currently displayed menu or sets the currently
selected value in to the current function
Navigates upward through the menu list and increases the
numeric value when in a function
Navigates downward through the menu list and decreases the
numeric value when in a function
Nexus™ 4x4
Refer to the Menu Map to understand the menu options. The menu map shows the main
level and a variable number of programming levels for each option.
• To navigate to the desired main level, press <MENU> repeatedly until the
desired option is displayed on the control panel. Press <ENTER> to select the
desired option. This will take you to the first programming level for that option.
• To select an option or value within the current programming level, press <UP>
<DOWN> until the option shows on the display. Press <ENTER> to select. In
this case, if there is another programming level, you will see that first option, or
you will see the selected value.
• Press <MENU> repeatedly to exit to the previous main level.
Auto programs allow for dynamic RGB color mixing without a DMX controller.
1. Go to Auto Show.
2. Select the desired Auto (01~12) or Fade program.
3. Select the
.
You cannot edit any of the auto programs.
The Static Color mode allows for preset or custom RGB color mixing without a DMX
controller.
1. Go to the Static main level.
2. Select Fixture Color or Manual Color.
a. Fixture Color:
i. Select desired color (R, G, B, GB, RB, RG, or RGB).
b. Manual Color:
i. Select the desired color (R, G, or B).
ii. Select the desired color value (000~255).
iii. Repeat the steps for each color.
This setting determines how fast the output of the Nexus™ 4x4 changes when you
modify the values of the red, green, blue, and dimmer faders. This setting provides 3
different options to simulate the dimming curve of an incandescent lighting product.
1. Go to the Dimmer Mode main level.
2. Select a dimmer curve (
,
,
, or
).
The output is proportional (linear) to the Dimmer and RGB channel values.
The output follows the dimmer and RGB channel values based on the
corresponding dimmer curve, being DIM1 the fastest and DIM3 the
Kommentare zu diesen Handbüchern