Chauvet DL-LEDW Bedienungsanleitung PDF herunterladen (Seite 20)

Page 16 of 28 WELL™ 2.0 User Manual Rev. 01

Continued from previous page

Reset

This setting allows the user to reset the WELL fixture to its default values, including

deleting the custom programs.

1) Go to SET.

2) Select REST.

3) When prompted, enter the master access password as shown in Control Panel Lock.

4) Wait for the reset process to finish.

Default Values

Parameter

Default Value

Parameter

Default Value

STAT

R/G/B.000

LIFE

NORM

AUTO

AT.01

EDIT

PR.01/SC.01

ADDR

D.001

CAL1

WH.01

RUN

DMX

RGB.W

R/G/B.255

PERS

TOUR

WDMX

ACTI

DIM

DIM4

KEY

OFF

COLO

TOUR Notes

These notes intent to clarify the way the TOUR DMX personality works.

Master Dimmer

• Channel 1 (Dimmer) controls the intensity of the currently projected color.

• When the slider is at the highest position (255) the intensity of the output is at its

maximum.

Red, Green, and

Blue Color

Selection

• Channels 2 though 7 control the intensity ratio of each of the Red, Green, and Blue

colors on each LED panel.

• When these six sliders are at their highest setting (255), the intensity of each color is at

its maximum if SET > COLO is OFF.

Color Macros

• Channel 8 (Macros) selects the required color macro.

• Channel 8 has priority over channels 2 through 7.

•

Channel 1 (Dimmer) controls the intensity of the selected color macro.

Strobe

• Channel 9 controls the strobe frequency (not the intensity) of channels 2 through 7.

• Channel 9 can strobe channels 2 through 7 when the WELL is not running macros

(channel 8 inactive), thus allowing the individual color faders as well as channel 1

(Dimmer) to control the output intensity.

• Channel 9 can strobe channel 8 when the WELL is running macros (channel 8 active),

allowing channel 8 to select the macro and channel 1 to control the output intensity.

Auto/Custom

• Channel 10 (Auto/Custom) selects the preset auto programs

AT.01~10

or the custom

programs PR.01~10.

• Channel 10 has priority over channels 2 through 9.

•

Channel 11 determines the speed at which each auto program (AT.01~10) plays.

Dimmer Speed

• Channel 12 selects the dimmer mode and speed. When DIM is set to OFF, the changes

in the RGB and Dimmer faders are linear. Otherwise, DIM1 is the fastest dimmer curve,

while DIM4 is the slowest.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Chauvet DL-LEDW Bedienungsanleitung Seite 20

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Flutlichter Chauvet DL-LEDW