Chauvet Rogue R1 Spot Bedienungsanleitung PDF herunterladen (Seite 3)

Rogue™ R1 Spot QRG EN

AC Power

This product has an auto-ranging power supply that can work with an input voltage

range of 100–240 VAC, 50/60 Hz.

Power Linking

You can link up to 6 Rogue™ R1 Spot products at 120 V, 12 products at 208 V, or

products at 230 V. Never exceed this number. Power linking cords can be

purchased separately.

AC Plug

Connection

Wire (U.S.)

Wire (Europe)

Screw Color

AC Live

Black

Brown

Yellow/Brass

AC Neutral

White

Blue

Silver

AC Ground

Green/Yellow

Green

Replacing The Fuse

1. Disconnect this product from power.

2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.

3. Remove

blown fuse and replace with a good fuse of the same type and rating.

4. Screw the fuse holder cap back in place and reconnect power.

DMX Linking

The Rogue™ R1 Spot will work with a DMX controller using a 3- or 5-pin DMX

data connection. A DMX Primer is available from www.chauvetprofessional.com

DMX Connection

The Rogue™ R1 Spot uses a 3- or 5-pin DMX data connection for its DMX

personalities: 16CH and 19CH.

See the User Manual for information about

connecting and configuring the product for DMX operation.

1 2 3 4 5 6 7 8 ... 39 40

Keine Kommentare

Chauvet Rogue R1 Spot Bedienungsanleitung Seite 3