Chauvet Q-WASH 360Z-LED Bedienungsanleitung PDF herunterladen (Seite 12)

Setup

-8- Q-Wash 360Z-LED User Manual Rev. 01g

Mounting

Before mounting this product, read and follow the safety recommendations indicated in the

Safety Notes section (page 2 of this manual).

Orientation

Always mount this product in any safe position while making sure that there is adequate

room around it for ventilation, head motion, configuration, and maintenance.

Rigging

CHAUVET® recommends following the general guidelines below when mounting this

product.

• When selecting an installation location, consider ease of access to the fixture for

operation, programming adjustments, and routine maintenance.

• Make sure to mount this product away from any flammable material, as indicated in the

Safety Notes section, or obstructions that may block the moving head.

• Never mount the product in places where rain, high humidity, extreme temperature

changes, or restricted ventilation may affect it.

• If hanging this product, make sure that the location where you are mounting it can

support its weight. Please see the Technical Specifications section of this manual for

the weight requirement of this fixture.

Procedure

The Q-Wash 360Z-LED comes with two omega brackets to which you can attach “C” or “O”

clamps. You must supply your own “C” or “O” clamps and make sure that they are capable

of supporting the weight of this fixture. You will have to use two mounting points per fixture.

The omega brackets also serve to anchor this product to a panel. For floor standing

operation, this product has built-in rubber feet.

Product Mounting

Diagram

Safety Cable (included)

C clamp (not included)

Omega bracket (included)

Overhead Mounting

Floor Standing

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 25 26

Keine Kommentare

Chauvet Q-WASH 360Z-LED Bedienungsanleitung Seite 12