Chauvet PiX PAR 12 Bedienungsanleitung PDF herunterladen (Seite 11)

PiX™ PAR 12 User Manual Rev. 3 Page 11 of 20

Configuration

(DMX)

Set the product in DMX mode to control with a DMX controller.

1. Connect the product to a suitable power outlet.

2. Turn the product on.

3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input

socket on the product.

DMX

Personalities

and

Starting

Address

The PiX™ PAR 12 has four DMX personalities, from a 3-

channel mode for basic control

to a 36-channel mode with more advanced control over the lights.

The PiX™ PAR 12 uses up to 36 DMX channels in its 36-

channel DMX mode, which

defines the highest configurable address to 477.

When selecting a starting DMX address, always consider the number of DMX channels

the selected DMX mode uses. If you choose a starting address that is too high, you could

restrict the access to some of the product’s channels.

If you are not familiar with the DMX protocol, you may refer to the DMX Primer at

www.chauvetlighting.com

To select the DMX personality, do the following:

1. Press <MENU> repeatedly until 3-CH, 9-CH, 12CH, or 36CH shows on the display.

2. Press <ENTER> to choose your DMX personality when it appears on the display.

To then choose your starting address:

1. The display should show d 1 once you’ve selected your DMX personality using the

steps above.

2. Use <UP> or <DOWN> to select the starting address.

3. Press <ENTER>.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Keine Kommentare

Chauvet PiX PAR 12 Bedienungsanleitung Seite 11