Chauvet LG-20 Bedienungsanleitung PDF herunterladen (Seite 7)

Automatic

1) Set 2-Way Switch to the left.

2) Set Dipswitch 2 to the ON position.

Master/Slave Mode

The Master/Slave mode will allow you to link up to as many units you want in a daisy chain fashion. In

this mode, the first unit in the daisy chain when set to Master will command all other units following

set to Slave.

1) Set Dipswitch 1 to the OFF position, and then proceed to connect the linking cable into the

output connection on the back of the unit. The green LED should not be lit.

You can set the master to operate either in a Sound-Active or Automatic mode by setting

Dipswitch 2.

2) Connect the other end of the cable to the input connector of the back of the slave unit. Set

Dipswitch 1 to the ON position on the slave unit. The green LED will turn on.

3) Continue the link by coming out of the output and into the input of the following unit and

remember to set all slave fixtures Dipswitch 1 to the ON position.

Manual Mode

In manual mode Pattern Rotary Knobs 1 and 2 are available for image creation and manipulation.

1) Set 2-Way Switch to the right to set unit to Manual mode.

2) Use both Pattern Rotary Knobs 1 and 2 to create patterns.

LG-20 User Manual 7 11/14/2007/18:10

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Chauvet LG-20 Bedienungsanleitung Seite 7