Chauvet COLORado Panel Bedienungsanleitung PDF herunterladen (Seite 13)

Operation

COLORado™ 2 User Manual Rev. 03b -9-

4. Operation

Control Panel

Description

Button Function

<MENU>

Exits from the current menu or

function

<ENTER>

Enables the currently displayed

menu or sets the currently

selected value into the current

function

<UP>

Navigates upwards through the

menu list or increases the

numeric value when in a function

<DOWN>

Navigates downwards through

the menu list or decreases the

numeric value when in a function

Control Options

You can set the COLORado™ 2 start address in the 001~512 DMX range. This allows

for the control of up to 46 fixtures in the 11-channel STAG

personality. In addition, the

ID address system allows you to assign up to 66 fixtures within the same DMX

address, thus multiplying the number of fixtures you can control within a single

universe. You can access the fixture’s ID address system from channel 11 when in the

STAG personality.

When programming live performances as well as cues that need to trigger on

demand or on a time line, program no more than 10 fixtures on ID addressing per

DMX channel. This is to remain within a one-second execution time.

Programming

Carry out all the programming procedures indicated below from the control panel. Refer

to the Menu Map on page 14 to learn how the menu options relate to each other.

DMX Personality

This setting allows the user to choose a particular DMX personality.

1) Press <MENU> repeatedly until PERS shows; press <ENTER> to accept.

2) Use <UP> or <DOWN> to select the desired personality (STAG, ARC1, AR1 + D,

ARC2, AR2 + D, AR2 + S, or HSV).

3) Press <ENTER> to accept.

4) Press <MENU> to return to the main level.

DMX Control

Without ID

Addressing

In this mode, each unit will respond to a unique starting address from the DMX

controller. All units with the same starting address will respond at unison.

1) Select the STAG personality as shown in DMX Personality.

2) Set the running mode:

a) Press <MENU> repeatedly until RUN shows; press <ENTER> to accept.

b) Use <UP> or <DOWN> to select DMX; press <ENTER> to accept.

c) Press <MENU> to return to the main level.

3) Set the starting address:

a) Press <MENU> repeatedly until DMX shows; press <ENTER> to accept.

b) Use <UP> or <DOWN> to select the starting address (001~512).

c) Press <ENTER> to accept.

d) Press <MENU> to return to the main level.

4) Deactivate ID Addressing in each fixture:

a) Press <MENU> repeatedly until SET shows; press <ENTER> to accept.

b) Use <UP> or <DOWN> to select ID; press <ENTER> to accept.

c) Use <UP> or <DOWN> to select OFF; press <ENTER> to accept.

d) Press <MENU> twice to return to the main level.

Make sure to deactivate ID Addressing in each fixture when using the STAG

personality. Otherwise, unintended results may occur if channel 11 is not set to

“0”.

Continues on the next page

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Chauvet COLORado Panel Bedienungsanleitung Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Flutlichter Chauvet COLORado Panel