Chauvet COLORado Panel Bedienungsanleitung PDF herunterladen (Seite 17)

COLORado™ Panel User Manual 17 8/19/2008 1:08 PM

DOWN

SET

Setting the DMX address

Each fixture requires a "start address" from 1 to 512. A fixture requiring one or more channels for

control begins to read the data on the channel indicated by the start address. For example, a fixture

that occupies or uses 7 channels of DMX and was addressed to start on DMX channel 100, would

read data from channels: 100, 101, 102, 103, 104, 105 and 106. Choose start addresses so that the

channels used do not overlap and note the start address selected for future reference. The

COLORado™ Panel uses up to9 channels of DMX. If this is your first time using DMX, we

recommend reading the DMX Primer in the Appendix Section.

Control Panel Functions

All fixture functions and settings are accessible via the built-in control panel interface.

BUTTON

FUNCTION

Exits from the current menu or function

SET

Enables the currently displayed menu or sets the currently selected value in to the

selected function

Navigates upwards through the menu list and increases the numeric value when in

a function

DOWN

Navigates downwards through the menu list and decreases the numeric value when

in a function

Over Heat Protection

The COLORado™ Panel has a built-in temperature sensor. In the event that the temperature on the LED’s

exceeds 55°C, the LED’s will begin to gradually dim. This will reduce the current going to the LED’s, and

cause the fixture to draw less power.

Note: this is just a protection built into the fixture, and it is very unlikely for the fixture to

reach these extreme temperatures. If this does initiate, it would likely only be in the

Hyper™ Color mode in extreme ambient temperatures.

DISPLAY

ACTION

High ˆT

Indicates that the thermal protection has initiated, and is gradually dimming the LED’s

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 34 35

Keine Kommentare

Chauvet COLORado Panel Bedienungsanleitung Seite 17