Chauvet Amhaze II Bedienungsanleitung PDF herunterladen (Seite 11)

Operation

AmHaze™ User Manual Rev. 01g -7-

4. Operation

Preparation

Once installed, you have to prepare the AmHaze™ for operation. To do so, follow these

steps:

1) Open both ends of the flight case.

2) Pull the fluid tank out of its location.

3) Remove the cap of the fluid tank.

4) Verify that the two plastic hoses attached to the cap are in place and in good condition.

5) Pour Chauvet haze fluid inside the tank.

6) Replace the cap of the fluid tank making sure that is tightly closed

7) Reinsert the tank in its location.

8) Make sure that the plastic hose that goes from the cap to the hazer is not bent.

9) To direct the haze up or down, pull the haze guide from the front panel and re-inserted

in the desired position.

Only use CHAUVET® approved haze fluid. Otherwise, you might not have

satisfactory results. In addition, the unapproved fluid can damage the AmHaze™, or

it may cause harm to humans or animals.

Control Panel

Description

Before using the AmHaze™, you should become used to its control panel.

The table and diagram below will provide you with a description of its buttons and

functions.

Button

Function

Enters the programming mode

Controls the haze pump to modify the output volume

<TIMER>

Starts the timer controlled operation

<STOP>

Stops the current operation, whether manual or timer controlled

<ENTER>

Enables the currently displayed menu or sets the currently selected value

in to the current function

<UP>

Navigates upward through the menu list and increases the numeric value

when in a function

<DOWN>

Navigates downward through the menu list and decreases the numeric

value when in a function

Control Panel Diagram

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

Keine Kommentare

Chauvet Amhaze II Bedienungsanleitung Seite 11