Page 14 of 18 SlimPAR™ Pro VW User Manual Rev. 6
Configuration
(Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
• Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode (Static or
Automatic) to a DMX string connected to a DMX controller. Product
mode may transmit DMX signals
that could interfere with the DMX signals from
the controller.
Automatic Mode
To enable the Automatic mode, follow the instructions below:
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the desired auto program, P--1–P--5.
4. Press <ENTER> and S00–S100 shows on the display.
5. Use <UP> or <DOWN> to select the auto program speed
S000–S100 (fast to slow).
6. Press <ENTER>.
Preset
Preprogrammed, static color temperature presets may be triggered without a controller,
as follows.
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the desired color temperature:
• C-01 - White 1, 2800 K
• C-02 - White 2, 3000 K
• C-03 - White 3, 3300 K
• C-04 - White 4, 3600 K
• C-05 - White 5, 4000 K
• C-06 - White 6, 4500 K
• C-07 - White 7, 5600 K
• C-08 - White 8, 6000 K
• C-09 - White 9, 6300 K
4. Press <ENTER>.
Color
To combine warm and cool white to create a custom, static color temperature mix
the instructions below:
1. Press <MENU> repeatedly until U-- shows on the display.
2. Press <ENTER> and AXXX (warm white), WXXX (cool white), or SXXX (strobe)
show on the display.
3. Use <UP> or <DOWN> to select the desired option and press <ENTER>.
• Use <UP> or <DOWN> to select the desired warm white color,
A000–A255 (0–100%).
• Use <UP> or <DOWN> to select the desired cool white color
W000–W255 (0–100%).
• Use <UP> or <DOWN> to select the desired strobe speed
S000–S020 (0–20 Hz).
4. Press <ENTER> to set selection and to go to the next option.
Dimming Curve
To combine warm and cool white to create a custom, static color temperature mix
the instructions below:
1. Press <MENU> repeatedly until dIM shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select dIM1–dIM3 (small to large) or OFF(linear output).
4. Press <ENTER>.
Kommentare zu diesen Handbüchern